Palletizing
Palletizing cell with a FANUC robot
End-of-line cell with a FANUC robot and safety fencing, installed and commissioned at the plant by our team.
FANUC robot integrator in Chile
Mundos Virtuales is an official FANUC robot integrator in Chile since 2017: we design, program and commission FANUC robotic cells and provide maintenance nationwide.
From a robot to a productive cell
A FANUC robot arrives ready to move, but not ready to work on your line. It still needs the end effector that picks the part, the safety systems that protect people, the controls that connect it to the rest of the plant and a program tuned to your process. That is the job of a FANUC integrator, and it is what we do.
Official FANUC integrator since 2017
We have had an integrator agreement with FANUC since 2017. Every robotic cell we integrate uses FANUC robots, and we have more than 9 years of experience integrating and maintaining robots.
In 2020 we were the first in Latin America to use the FANUC force sensor in production.
What we do in a FANUC robot project
Assessment and cell design
We start with a technical assessment of the process and your goals. From there we define the robot, layout and cycle times, and validate them in 3D simulation before building anything.
Gripping tool
We use SCHUNK grippers or design a custom end effector, with 3D printed or machined parts from our workshop, depending on the part the robot needs to pick.
SCHUNK and custom grippersProgramming and integration
We program the robot and connect it to PLCs, HMIs, sensors, computer vision and the machines already running on the line.
Commissioning and after-sales
We install the cell, run FAT and SAT testing as required and support the start-up. Afterwards we continue with preventive and corrective maintenance, program adjustments, recipe changes and calibration.
FANUC robot maintenanceFANUC robot projects
Cash management
Multi-robot banknote cell
Two coordinated FANUC robots handle banknotes simultaneously, with our own grippers and computer vision. See it in cash management
Computer vision
FANUC Delta robot with 3D vision
A FANUC Delta M3ia with a SCHUNK needle gripper, guided by a 3D camera and a color camera, in a chicken leg detection system. See computer vision
Part handling, assembly and machine tool loading follow the same process, which we explain on our robotic cells page. See also our industrial automation projects and case studies.
Robot and end effector, one team
Besides being an official FANUC integrator, we are an official SCHUNK distributor in Chile for gripping systems. That lets us handle the robot and the gripper in the same project, without coordinating another supplier.
When no standard gripper fits the part, we design and build one with 3D printing, machining and assembly in our workshop. That is how we made the grippers that pick banknotes without damaging them.
Meet our workshop and teamHow much does it cost to integrate a FANUC robot?
It depends on the process, which is why we do not publish fixed prices. The robot is only part of the project: the end effector, safety and integration with your line also drive the cost.
We quote after a technical assessment and propose the scope, technologies and work plan, including after-sales support.
What drives the cost
- Robot
- Model chosen for the payload, reach and speed the application requires.
- End effector
- Standard gripper or one custom-designed for your part.
- Safety
- Fencing, sensors and guarding based on the cell layout.
- Integration
- Connection to PLCs, conveyors, vision and existing machines.
- Commissioning
- Installation, FAT and SAT testing and start-up support.
FANUC robot FAQ
Can't find your question? Write to us and a specialist from the area will reply.
Is Mundos Virtuales an official FANUC integrator in Chile?
Yes. We have been an official FANUC robot integrator in Chile since 2017. We design, program and commission FANUC robotic cells, and we stay in charge of maintenance after handover.
What does a FANUC integrator do?
A FANUC integrator turns a FANUC robot into a cell that works inside your process: it designs the cell, selects or builds the end effector, handles safety, programs the robot, connects it to the plant controls and commissions it. We also stay in charge of maintenance.
What is a FANUC robot used for?
FANUC is a Japanese manufacturer of industrial robots and CNC controls. Its robots are used for palletizing, handling and assembling parts, loading machine tools and vision-guided picking, among other repetitive or heavy tasks.
How much does a FANUC robot cost in Chile?
It depends on the model and, above all, on everything around it: end effector, safety, integration and commissioning. That is why we quote after a technical assessment of the process and propose the scope, technologies and work plan.
Do you program FANUC robots?
Yes. Robot programming is part of every integration. In cells that are already running we also adjust programs and change recipes.
Do you provide preventive maintenance for FANUC robots?
Yes. We provide preventive and corrective maintenance, program adjustments, recipe changes and robot calibration. If another company installed the robot, tell us the model and the application so we can assess the scope.
Do you work with SCHUNK grippers?
Yes. We are an official SCHUNK distributor in Chile for gripping systems (grippers): we sell them and integrate them into our cells. When the part requires it, we design and build custom grippers.
Do you have a process to robotize?
Tell us what your line does today and we will propose the scope, technologies and work plan, including after-sales support.